What is Hydro Jetting



A clogged drain located deeply in the line will likely cause a bigger issue than you think. Blockages in sewer lines and plumbing systems could prevent water and waste from going down the drain. If these issues are taken for granted, it will cause the drain to overflow resulting in sewage backups.  Serious sewer problems may pose a health risk to you and your family and you wouldn’t want this to happen. So what is the best option to do in preventing this to occur? The answer? Hydro Jetting.  

What is Hydro Jetting?

Hydro Jetting is an advanced method of cleaning sewer and drain lines. It requires the use of high-tech equipment to clean clogged or slow sewer systems via a continuous blast of water at high pressure that can reach up to 5,000 PSI. The pressurized water that comes from the rotating nozzle will surge into the sewer lines to eliminate hard to remove blockages caused by potentially damaging materials including:

  • Grease

  • Mineral scale

  • Debris

  • Tree roots

Can Anyone Perform Hydro Jetting?

The process of hydro jetting can only be carried out by highly trained, professional plumbing contractors.  Since hydro jetting uses high-pressure water, this may cause irreversible damage if used in the wrong way, thus, it should be carefully operated and should not be handled by an inexperienced plumber.

Is Hydro Jetting a Good Option?

There are a lot of advantages that hydro jetting offers:

  • It is non-invasive, so no digging is required to fix a clogged pipe.

  • It is safe because hydro jetting doesn’t use chemicals to get rid of hard to remove blockages.

  • It is environmentally friendly since it uses pressurized water to remove clogs.

  • It provides fast relief because it cleans the drain instantly making your drain hassle-free.



Read the full article here: What is Hydro Jetting?


Other Plumbing Services

Related Articles


Comments

Post a Comment

Popular posts from this blog

What You Need to Know About Trenchless Sewer Repair

  What You Need to Know About Trenchless Sewer Repair Cost One of the most challenging plumbing issues a household can face is the need to install a new sewer line. The traditional dig-and-replace methods usually come with a lot of cons. The process can take weeks, and it requires an extensive amount of physical labor (adding to the cost). Fortunately, there is a less invasive option to restore your plumbing system. Trenchless sewer pipes can connect you to the main sewer lines without damaging your landscape (or public property) in the process. Here is what you need to know about trenchless sewer repair cost What is a Trenchless Sewer Pipe? A trenchless sewer pipe is a good alternative for your existing pipe by applying a minimally-invasive technique to avoid the strenuous excavation work. The sewer pipes can be installed by either using the pipe bursting method or pipe lining. Average Cost of Trenchless Sewer Pipe Repair Versus Traditional Pipe Repairs Trenchless repair methods c...
Read more

Hydro Jetting vs Snaking Which Should You Choose?

Image
Overflowing sinks and drains that don’t function well are some of the common problems that homeowners will face. That being said, regular cleaning of your sewer and drain line should be done to avoid these problems. To prevent this type of clogging from happening, plumbing companies usually handle these plumbing issues by two common methods – either by snaking or hydro jetting.  Which method is better and which should you choose? Let’s try to understand more about each method and the difference between the two so you can decide which method is the best option for your home. Read the full article here: Hydro Jetting vs Snaking Which Should You Choose? What is Snaking? Snaking is a method of cleaning your drain with the use of a plumbing auger . The plumbing auger is a flexible, metal cable with a corkscrew-like coil at one end. It works by inserting the cable into the drain and as it goes further to the drain or sewer line, the corkscrew attached to the end rotates, breaking the cl...
Read more

My Cast Iron Sewer Pipe is Rusting and Leaking

Image
Cast iron sewer pipe was a popular choice for sewer lines in homes built prior to the 1970s for the following reasons: Plastic pipes were not yet available at the time. Cast iron pipes have a long lifespan, lasting between 80 and 100 years. Cast iron sewer plumbing is strong and can withstand heavy loads and high pressure. The material used for this pipe greatly reduces the sound of water and sewage flowing. It is heat resistant. However, despite many advantages, one major downside of this type of sewer pipe is its likelihood to rust over time. Related Articles When Should I Request Sewer Repair? How often do sewer lines need to be replaced? What You Need to Know About Trenchless Sewer Repair Cost If you live in a house built in the 1930s or 1940s, your sewer plumbing system may be nearing the end of its useful life, with rusting and leaking already taking place. Aside from rust and corrosion, other factors such as erratic weather changes, tree roots, soil type, and water quality can a...
Read more